Drilled Shaft Foundation Inspection
Instructor-led Training (ILT)
TRAINING LEVEL: Intermediate
CLASS SIZE: Minimum: 20 Maximum: 35
Drilled Shaft Foundation Inspection is a stand-alone course developed to provide a basis for local, regional, or national qualification of drilled shaft foundation inspectors. The goal of this course is to provide inspectors with practical knowledge and standard industry practices for the inspection of drilled shaft foundation construction. A 2-hour qualification exam is administered on the third day of the course.
The course follows recommended FHWA specifications and practices for drilled shaft construction but may be modified to follow local agency specifications and practices.
NOTE: All participants should be advised by the local coordinator/session host that they are encouraged to complete NHI 132070B Drilled Shaft Inspector Tutorial (WBT).
Upon completion of the course, participants will be able to:
Identify and understand the role and duties of the inspector
Recognize key inspection elements of the contract documents
Identify proper communication and coordination with the engineer and contractor
Interpret and verify contractor compliance with items in the drilled shaft installation plan
Recognize and identify drilled shaft construction equipment and tools
Perform visual field verification of soil/rock material for comparison to supplied soil boring data/logs
Calculate percent recovery and rock quality designation (RQD)
Recognize and identify the various types of drilled shaft construction
Perform inspection of drilled shaft excavations for compliance with plans, construction tolerances, and cleanliness
Verify reinforcing cage construction compliance including side spacers and cross-hole sonic logging (CSL) tubes
Determine concrete volumes for theoretical shafts and develop concrete curves
Identify shaft "concreting" irregularities
Perform calculations for volume, area, circumference, and elevation
Locate, explain, and apply applicable FHWA, AASHTO, and State DOT specifications relating to compliance
The target audience for this course includes agency and consultant personnel who inspect foundations or major structures. In addition, project management and construction engineers in charge of drilled shaft construction inspection are encouraged to attend. This course is designed to be most beneficial to foundation inspectors who are responsible for inspecting drilled shafts during construction.
If you have questions about this NHI training, please contact NHI at
firstname.lastname@example.org or 877.558.6873.
Sign up for session alerts
to receive email alerts when sessions of this course are scheduled.
Host this Course
The National Highway Institute (NHI) has been approved as an Authorized Provider
by the International Association for Continuing Education and Training (IACET),
1760 Old Meadow Road, Suite 500, McLean, VA 22102. In obtaining this approval, NHI
has demonstrated that it complies with the ANSI/IACET Standards which are widely
recognized as standards of good practice internationally. As a result of their Authorized
Provider membership status, NHI is authorized to offer IACET CEUs for its programs
that qualify under the ANSI/IACET Standards.